Pedals

Designed for commanding performance on trails and gravel roads. These pedals are simultaneously lighter and thinner than other XC pedals with an exceptionally low stack height, while also having more platform area for control and power transfer. An open center between the cages means increased mud shedding compared to other SPD-compatible pedals. Maximum Shoe Contact The large platform area maximizes pedal and shoe contact. This creates unprecedented control and power transfer for XC pedals. With many SPD-compatible XC pedals, the only point of contact between the shoe and pedal is the cleat and cage, where it can feel like pedaling on a golf ball. With ALT XC Clipless Pedals, the shoe contacts the pedal body for enhanced performance on gravel and trails alike. Best In Class ALT XC Clipless Pedals are lighter, feature more platform area, and have a thinner pedal body than the competition for maximum control, power transfer, and ground clearance. Stainless Durability These pedals will outlast your bike. The SPD-compatible stainless steel binding assemblies and axles create strong, rust-free pedals that are ready to ride hard on the nastiest dirt on the map. Crisp SPD Clipping Clipping in and out needs to be simple, quick, and reliable. The ALT XC Clipless Pedals feature an SPD-compatible stainless steel binding that will work with your existing SPD cleats. They are optimized for the Wolf Tooth cleats that are included in the box. We improved the clipping experience so you can swiftly clip in at the start of the race, stay clipped in when it matters most, and unclip as quickly as needed. Adjustable Q Factor Adjusting the Q factor (pedal stance width) moves the pedal toward or away from the center of the bike. ALT XC Clipless Pedals feature patent-pending Q factor adjustment options of 51, 55, and 59mm to fine-tune your fit, and ship set at 55mm. Adjusting Q factor is simple enough to do at home. Ground Clearance and Mud Shedding We designed ALT XC Clipless Pedals with a thin profile and open center. A thin profile means a reduced chance of pedal strikes when cornering or riding over rocks and roots. The open center quickly sheds mud that can interfere with clipping in and out to ensure that your clips and unclips are quick and reliable. Reliable Construction ALT XC Clipless Pedals feature machined components from Wolf Tooth HQ here in Minnesota, USA. The internal components use the same proven design from our popular Waveform Aluminum Pedals, including a machined stainless steel axle, three low-friction cartridge bearings, and one igus bushing with a custom radial seal that protects internal components from trail debris. Simply put: these pedals will perform in any/all conditions.

Wolf Tooth CTRL Trail Clipless Pedals are designed for unparalleled control and support for all-mountain riding with flawless clip-in/out performance. No other SPD-compatible trail pedal has a large platform (941 mm2) that contacts the shoe and locks in the shoe like this. CTRL Trail Clipless Pedals are simultaneously lighter (326 g) and thinner (15 mm) than all other trail mountain bike pedals with an exceptionally low stack height. The thin profile means better cornering clearance, while the open center between the binding cages increases mud shedding ability. The CTRL Trail Clipless Pedals have adjustable Q factor in 4 mm increments. Inside the pedal is a stainless steel axle, three bearings, and two spacers. Spacers and bearings can be rearranged for Q factors of 51, 55, or 59 mm. This is simple enough for anyone to do at home. A spacer kit including 4x 2mm spacers is available for purchase to further fine tune Q factor adjustment. Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair. - Thinner than the competition at 15 mm (compared to the Shimano XTR 9220 at 18.2 mm and the Hope TC at 18.2 mm) - Lighter than the competition at 326 g (compared to Shimano XTR 9220 at 439 g and Hope Trail at 438 g) - Bigger platform area than the competition at 941 mm2 (compared to Shimano XTR 9220 at 883 mm2 and Hope Trail at 645 mm2) - Adjustable Q factor range of 51, 55, and 59 mm (additional 53 and 57 mm options available as 2 mm spacers sold separately with spacer kit) . Pedals ship in 55 mm position. - Proven axle and bearing design from Waveform Aluminum Pedals - Designed, tested, and machined at Wolf Tooth in Minnesota, USA

Wolf Tooth DEL Gravel Race Clipless Pedals feature a one-sided design for peak speed and consistent performance in gravel races. These bike pedals are exceptionally lightweight at only 216 g, while still featuring a large platform for maximum power transfer and a connected feel that approaches that of a road pedal. The one-sided design features an open center between the binding cages for mud shedding. It has all the advantages of a road pedal, but with a shoe and cleat system that works in all conditions. The DEL Gravel Race Clipless Pedals have an adjustable Q factor of 4 mm increments. Inside the pedal is a stainless steel axle, three bearings, and two spacer. The spacers and bearings can be rearranged for Q factors of 51, 55, or 59 mm. This is simple enough for anyone to do at home. A spacer kit including 4x 2mm spacers is available for purchase to further fine tune Q Factor adjustment. Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair. - Thinner than the competition at 14.7 mm (compared to Xpedo MF8 at 17 mm, Shimano XTR 9200 at 16.5 mm, and Eggbeater 3 at 17 mm) - Lighter weight than the competition at 216 g (compared to Xpedo MF8 at 220 g, Shimano XTR 9200 at 316 g, and Eggbeater 3 at 265 g) - Larger platform area for power transfer than the competition at 559 mm2 (compared to Xpedo MF8 at 46 mm2, Shimano XTR 9200 at 144 mm2 and Eggbeater 3 at 102 mm2) - Adjustable Q factor options of 51, 55, and 59 mm (53 and 57 mm also available via spacer kit sold separately) . Pedals ship in 55 mm position. - Proven axle and bearing design from Waveform Aluminum Pedals - Designed, tested, and machined at Wolf Tooth in Minnesota, USA

Wellgo B-Series BMX/Mountain Platform Pedals. Molded pins

Wellgo B-Series BMX/Mountain Platform Pedals.

Wellgo LU-895 DU Caged Mountain Pedals feature a 1-Piece molded, cage-style body with DU Polymer bearing/bushings. Accepts toe clips/straps

M111 Pedals Pedal Body Material: Aluminum Color: Black Pedal Type: Toe Clip Compatible Pedal Spindle: 9/16" Spindle Material: Chromoly Defined Color: Black Weight: 304

- Forged alloy body and cage - Chromoly spindle - Toe clip compatible (clips included) - 504g pair - 9/16-inch spindle

- One-piece resin body - Chromoly spindle - Toe clip compatible - 366g pair

With loads of traction, sure-footedness, and premium control, Specialized's Bennies Platform Pedals are ready for everything from freeride madness to trail riding. They're made of a rugged, yet lightweight concave aluminum body with 24 replaceable pins for maximum grip. Durable chromoly axles and sealed cartridge bearings mean they're built to last. - 430 grams (pair) - Width x Length: 100 x 105mm - Thickness: 17.30mm in the center/19mm at each end

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals. - Weight: 533 grams (pair)

Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability. - 380 grams (pair)

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"

MSW Thump composite pedals feature a concave shape and tall pins to provide a "just-right" amount of traction--enough for the rigors of riding off-road--but with in-mold nylon pins to keep calves laceration-free on more casual rides. Balance doesn’t have to mean boring! - Tough nylon composite body with in-mold pins - Chromoly steel, 9/16” spindles, sealed cartridge bearings and nylon bushings - Platform size = 118 x 99 x 19 mm - Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort - Black - Made in Taiwan

- Touring/Cross pedals with light alloy body and toe-clip compatible cage - Don't let the retro looks fool you, this workhorse with its wide platform is great for everyday use

PA12 pedals feature a reinforced nylon composite body with in-mold pins and CNC machined chromoly spindle. - 2 x sealed bearings and DU bushings - In-mold pins - Dimensions: 100 x 95 x 18 mm

- Flip-flop clipless-or-flat mountain bike pedal
- Spring loaded rear clip mechanism with fixed front claw on one side
- Platform with 8 traction pins on the opposite side
- Forged 6061 aluminum body/cage with three sealed cartridge bearings
- Posi-Lock retention system with 6 degrees of float (SPD compatible XPT cleats included)
- Adjustable release tension

The CXR is the ultimate performance cyclocross pedal for riders looking for lightweight, durability, and strength. The Posi-Lock retention system allows superior adjustability and easy rapid engagement action. Specially designed larger front retention claw maximizes positive entry in wet and muddy conditions. Cromoly spindles are paired with three precision cartridge bearings for minimal maintenance. - Weight: 295g  - Body: 6061 Forged Aluminum - Spindle: Cromoly  - Bearings: 3 Cartridge  - Springs: SWP  - Cleat: XPEDO XPT (6° Float) 

- Cyclocross, Gravel and XC pedal with excellent mud shedding capabilities
- Easy entry through a larger front retention claw
- Titanium spindle
- Forged 6061 aluminum body with three sealed cartridge bearings
- Posi-Lock retention system with 6 degrees of float (SPD compatible XPT cleats included)
- Adjustable release tension

Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)

- Lightweight, forged 6061 aluminum body with ultra-thin 10mm profile
- 1 cartridge bearing and 1 DU bushing
- 12 grub pins per side
- 114x109x10mm

CTRL Performance Trail Clipless Pedals

Designed for unparalleled control and power transfer on dirt trails. No other SPD-compatible trail pedal has a platform that contacts your shoe and locks in your feet like these. They are simultaneously lighter and thinner than other trail pedals with a low stack height. The open center between the cages means increased mud shedding compared to other SPD-compatible pedals.

MAXIMUM SHOE CONTACT

The large platform area maximizes pedal and shoe contact. With many trail pedals, the only point of contact between the shoe and pedal is the cleat and cage, where it can feel like pedaling on a golf ball. With CTRL Performance Trail Clipless Pedals, the shoe contacts the pedal body to lock in your foot for enhanced performance.

Wolf Tooth CTRL Performance Trail Clipless Pedals are designed for unparalleled control and support for all-mountain riding with flawless clip-in/out performance. No other SPD-compatible trail pedal has a large platform (965 mm²) that contacts and locks in your shoe like this. CTRL Performance Trail Clipless Pedals are light (341 g) and thin (16 mm) compared to other trail mountain bike pedals with an exceptionally low stack height. The thin profile means better cornering clearance, while the open center between the binding cages increases mud shedding ability.

Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair.

Thinner than the competition at 16 mm (compared to the Shimano XTR 9220 at 18.2 mm and the Hope TC at 18.2 mm)

Lighter than the competition at 341 g (compared to Shimano XTR 9220 at 439 g and Hope Trail at 438 g)

Bigger platform area than the competition at 965 mm² (compared to Shimano XTR 9220 at 883 mm² and Hope Trail at 645 mm²)

Fixed Q factor of 55 mm

5 degrees float | 12 degrees release

SPD compatible

Proven axle and bearing design from Waveform Aluminum Pedals

Designed and tested at Wolf Tooth in Minnesota, USA

All SPD pedals benefit from simple regular maintenance. For best performance apply a drop of oil to the rear binding every 50 hours of riding or if you notice higher than normal clip in/out force. See the service guide for more information

Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms

Compatible with SPD cleats; Wolf Tooth cleats included

Fits all standard cranks with 9/16-20 tpi right- and left-hand threads – some kid's bikes and vintage bikes may have smaller incompatible threads

Elite Performance

ALT MK0 brings our proven XC race platform to another level. DLC-coated Ti axles, PVD-coated Ti hardware, and aggressive machining drops 49g of weight. At 246g per pair, they are built for extreme performance in World Cup XC and gravel racing. ALT MK0 are substantially lighter, thinner, and offer better power transfer than any other SPD compatible pedal.

MK0 components are proudly machined at Wolf Tooth HQ in Minnesota, USA.

Unrivaled Power Transfer

MK0 ALT XC Clipless Pedals feature an extra large platform area that maximizes pedal to shoe contact, creating unprecedented power transfer when compared to other XC pedals. Most SPD-compatible XC pedals only contact the shoe at the cleat and cage interface, which can feel like pedaling on a golf ball.

Crisp SPD Interface

MK0 ALT XC Clipless Pedals feature an SPD-compatible stainless steel binding that works with your existing SPD cleats, and are optimized for our Wolf Tooth MK0 stainless steel cleats, included in the box. We improved the clip in and out experience so you can swiftly clip in at the start of the race, stay clipped in when it matters most, and unclip as quickly as needed.

Wolf Tooth MK0 ALT XC Clipless Pedals are designed for commanding performance on trails and gravel roads. These pedals are simultaneously lighter and thinner than their Shimano, Hope, and HT counterparts, with an exceptionally low stack height, while also having more platform area for control and power transfer. This body design also features a more open center for better mud clearance than other clipless bike pedals. The SPD-compatible clip-in/out experience is quick and precise, with Wolf Tooth cleats included.

The MK0 ALT XC Clipless Pedals have an adjustable Q factor in 4 mm increments. Inside the pedal is a stainless steel axle, three bearings, and two spacers. The spacers and bearings can be rearranged for Q factors of 51, 55, or 59 mm. This is simple enough for anyone to do at home. A spacer kit including four 2 mm spacers is available for purchase to further fine tune Q Factor adjustment. Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair.

Thinner than the competition at 14.5 mm (compared to HT M2T at 17.5 mm, Shimano XTR 9200 at 16.5 mm and Hope RC at 18 mm)

Lighter than the competition at 246 g per set (compared to HT M2T at 260 g, Shimano XTR 9200 at 316 g and Hope RC at 322 g)

Larger platform area than the competition at 413 mm² (compared to HT M2T at 357 mm² and Shimano XTR 9200 at 144 mm²)

Adjustable Q factor options of 51, 55, and 59 mm. Pedals ship in 55 mm position

5 degrees float | 12 degrees release

SPD compatible

Proven axle and bearing design with three cartridge bearings and one igus bushing for smooth operation and long life

Designed, tested, and machined at Wolf Tooth in Minnesota, USA

Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms

All SPD pedals benefit from simple regular maintenance. For best performance, apply a drop of oil to the rear binding every 50 hours of riding or if you notice higher than normal clip in/out force. See the service guide for more information

Compatible with SPD cleats; Wolf Tooth cleats included

Fits all standard cranks with 9/16-20 tpi right- and left-hand threads – some kid's bikes and vintage bikes may have smaller incompatible threads

Elite Performance

DEL MK0 takes our race winning gravel platform to another level. DLC-coated Ti axles, PVD-coated Ti hardware, and aggressive machining drops 43g of weight. At 174g per pair, they're purpose-built to rack up wins in the Lifetime Grand Prix, Gravel Earth, and UCI Gravel Series. DEL MK0 are substantially lighter, thinner, and offer better power transfer than any other 2-bolt clipless pedal. Ever.

MK0 components are proudly machined at Wolf Tooth HQ in Minnesota, USA.

Unrivaled Power Transfer

MK0 DEL Gravel Race Clipless Pedals feature a large platform area that maximizes pedal to shoe contact for unrivaled power transfer in a race-specific design. They feel more like a road shoe and pedal setup, rather than your run of the mill MTB shoe and XC pedal combination.

Adjustable Q Factor

Adjusting the Q factor (pedal stance width) moves the pedal toward or away from the center of the bike. MK0 DEL Gravel Race Clipless Pedals feature patent-pending Q factor adjustment options of 51, 55, and 59mm to fine-tune your fit, and ship set at 55mm. Adjusting Q factor is simple enough to do at home.

Wolf Tooth MK0 DEL Gravel Race Clipless Pedals are the lightest full-featured SPD-compatible pedals with a total weight of 174g. Extensive CNC machining is used to achieve the lowest possible weight while still maintaining excellent strength. They use a one-sided design for peak speed and consistent performance in gravel races. They feature a large platform for maximum power transfer and a connected feel that approaches that of a road pedal. The one-sided design features an open center between the binding cages for mud shedding. It has all the advantages of a road pedal, but with a shoe and cleat system that works in all conditions.

The MK0 DEL Gravel Race Clipless Pedals have an adjustable Q factor of 4 mm increments. Inside the pedal is a stainless steel axle, three bearings, and two spacer. The spacers and bearings can be rearranged for Q factors of 51, 55, or 59 mm. This is simple enough for anyone to do at home. A spacer kit including four 2 mm spacers is available for purchase to further fine tune Q Factor adjustment. Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair.

Thinner than the competition at 14.5 mm (compared to HT M2T at 17.5 mm, Shimano XTR 9200 at 16.5 mm, Xpedo MF8 at 17 mm and Look X-One G Ti at 18 mm)

Lighter weight than the competition at 174 g per set (compared to HT M2T at 260 g, Shimano XTR 9200 at 316 g, Xpedo MF8 at 220 g, and Look X-One G Ti at 240 g)

Larger platform area for power transfer than the competition at 559 mm² (compared to HT M2T at 357 mm², Shimano XTR 9200 at 144 mm² and Xpedo MF8 at 46 mm²)

Adjustable Q factor options of 51, 55, and 59 mm (53 and 57 mm also available via spacer kit sold separately). Pedals ship in 55 mm position

5 degrees float | 12 degrees release

SPD compatible

Proven axle and bearing design with three cartridge bearings and one igus bushing for smooth operation and long life

Designed, tested, and machined at Wolf Tooth in Minnesota, USA

Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms

NOTE: Using any titanium axle pedal with a titanium crankset will increase the risk of the pedal axle becoming permanently stuck in the crank arm. Always use anti-seize but be aware that this will not completely eliminate the risk

All SPD pedals benefit from simple regular maintenance. For best performance, apply a drop of oil to the rear binding every 50 hours of riding or if you notice higher than normal clip in/out force. See the service guide for more information

Compatible with SPD cleats; Wolf Tooth cleats included

Fits all standard cranks with 9/16-20 tpi right- and left-hand threads – some kids' bikes and vintage bikes may have smaller incompatible threads

Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. Slim Convex Profile Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support. Extra Grip Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized. Formed with Purpose The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer. Reliable Performance Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Precision Machining Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.

- Optimized for Gravity riding with a large pedal body and extra grip
- Eight optional/replaceable rear-loading traction pins per pedal (four per side)
- Premium stainless steel axles, bindings, and hardware
- Compatible with SPD cleats; Wolf Tooth cleats included
- 15mm thickness, 410g weight, platform area 1,201 square mm
- Adjustable Q factor in 4mm increments by rearranging spacers and bearings inside the pedal. Allows Q factors of 51, 55, or 59mm. This is simple enough for anyone to do at home
- Proven axle and bearing design carry over from Waveform aluminum pedals
- Fully serviceable with all replacement parts available

Waveform Pedals are designed for all-mountain riding, from XC to downhill. Available in two different sizes, proportionally scaled to provide a supportive platform that's shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 14mm thick at the perimeter and just 12.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions. - Proportionally designed platform, shaped to match shoe profile - Slim, concave profile with large tapered leading edge to deflect pedal strikes - 3 low friction, fully sealed cartridge bearings and 1 Igus bushing per pedal - V-ring rotary seal to protect against contamination - 11 stainless steel, rear-loading pins per side (pins 4.5mm tall), includes 6 extra grip pins - Fully serviceable with a set of hex keys, no special tools needed - Large Platform: 112mm x 106mm

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

Wolf Tooth Waveform Performance Aluminum Pedals are designed for all-mountain riding. Trail to downhill, laps in the bike park, and everything in-between. The pedals provide a supportive platform, shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 16mm thick at the perimeter and just 13.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 9 steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions.

Large platform measures 112mm x 106mm

Three high-precision, low-friction sealed bearings designed specifically for this pedal, with one inboard igus bushing

Custom radial seal to protect internal hardware from water, dirt, and trail debris

Nine steel, rear-loading 4.5mm pins per side

Dual Concavity secures your feet firmly in place on the pedals, both front-to-back and side-to-side

Tapered leading edge deflects pedal strikes

Available in five colors

Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms

Pins can be removed for desired grip by using a 3mm hex tool

Includes four extra grip pins. More pins are available on the replacement parts page. See installation instructions for recommendations on installing pins

Fits all cranks with 9/16-20 tpi right- and left-hand threads – some kid's bikes and vintage bikes may have smaller incompatible threads

Wellgo LU-A52 BMX Platform Pedals provide stability and traction where it's needed. - Removable traction pins - Sealed bearings

Wellgo WPD-823 Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-51 compatible - Dual-spring release/entry tension adjustment - Four degrees of Rotation - 9/16"

Wellgo WPD-95B Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-SH51 compatible - Four degrees of Rotation

Built on the cutting-edge Speedplay Pedal System, Power Zero single-sided power pedals deliver reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance by providing the visibility, adjustability and efficiencies needed to break through to the next level. Pair with the Wahoo ecosystem of smart devices for a more full picture of your data and performance, and to track, analyze, share and improve. - Single-sided power metrics measure cadence from the left pedal; power is tracked and doubled to estimate total power output no matter where you are crushing watts, with lab tested +/- 1% power accuracy - Simple and intuitive Wahoo Fitness app offers guided instructions on how to install Power Zero's on any bike, calibrate the pedals for accuracy, and perform firmware updates - Simultaneously connect to three Bluetooth devices while broadcasting to an unlimited number of ANT+ devices Power Zero is built on on the dual-sided entry Speedplay Pedal System, which maximizes power transfer by putting your foot closer to the spindle. No more fumbling, fussing or kicking your pedal over; leverage a powerful take off when the light turns green and clip in with ease - Power Zero and the Speedplay Standard Tension Cleat create a secure connection and a streamlined profile. The two form a seamless integration that aids power transfer and increases aerodynamics. The slim profile cleat and rubber texture create enhanced stability when walking in your road shoes off the bike - The cleat can be positioned on the bottom of the shoe and adjusted fore-aft, left-right and rotationally, allowing between 0-15 degrees of float, allowing the heel to pivot around the center of the pedal. This range of motion in the foot, lower leg and knee increases comfort and enhances pedal efficiency - Uncompromised durability and minimal maintenance thanks to their stainless steel construction and triple-sealed bearing system Powered by a rechargeable lithium battery, Power Zero power pedals have a battery life with up to 75 hours, tested and proven to provide accurate power data across changing temperatures that you are sure to encounter while riding - Pair with the rest of the Wahoo Ecosystem compatible devices for the most connected training experience

Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed

The Speedplay Nano is a featherweight, dual-sided road pedal that lives up to the demands of sprint finishes, categorized climbs, and tough training sessions. The mix of premium titanium and carbon fiber materials creates a lightweight but strong pedal that will hold up and deliver speed on the breakaway. The integrated cleat system with 3-axis adjustability allows you to precisely dial in your fit for optimized biometrics and increased power transfer. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics. Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day. - Weight: 168g (per pedal pair) - Spindle Material: Titanium - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability. - 406 grams - 9/16" axles

Alloy pedals with a smaller platform that is ideal for smaller sized shoes and offers ample ground and cornering clearance. - 6061-T6 die-cast alloy body construction - 2DU Bushing System with low-friction coating - Boron axles - 14 removable traction pins per pedal - Pedal body dimensions: 105 x 93 x 25mm (LxWxH) - 9/16"

The ATAC XC is a great option if you're looking for a great deal in a performance pedal for cross country. The pedal features top ergonomics with a steel axle for durability, a composite body, and tension adjustment to customize the feel of the pedal underfoot. The exclusive ATAC clamping system offers easy engagement, and the open design automatically clears debris each time you step in.
Features
- Easy clip in and pedal engagement.
- Durable for XC, gravel, cyclocross.
- Self-cleaning design to push out mud with step in.
- Tension adjustment.
- Cleats included with all pedal purchases.

The ATAC XC 10 is a favorite pedal of competitive riders because of its light weight and ergonomic design. The pedal features the lightness of a carbon body with the durability of a hollow steel axle, as well as tension adjustment to fit your needs. Freedom of movement lateral and angular for reduced injuries and muscle fatigue. The pedal's self-cleaning design clears mud and debris each time you step in. The ATAC XC 10 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is a great option for XC, gravel, or cyclocross.
Features
- Easy clip in and pedal engagement.
- Light hollow steel axle and carbon body for light weight.
- Self-cleaning design to push out mud with step in.
- Tension adjustment.
- Cleats included with all pedal purchases.

The ATAC XC 12 is our lightest off-road pedal, purpose-built for quick windup and trail speed. TIME's premier XC pedal is also designed for your comfort thanks to an ergonomic design. It all starts with simple clip-in thanks to a wide-angle of positive cleat engagement. Once you're in the clipped in, the features of ATAC XC 12 really kick in: Freedom of movement lateral and angular for reduced injuries and muscle fatigue. The pedal's self-cleaning design clears mud and debris each time you step in. Light and strong with a titanium axle and carbon body, ATAC XC 12 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is ideal for gravel and cyclocross as well.
Features
- Ideal for XC, gravel, or cyclocross.
- Easy clip in and pedal engagement.
- Titanium axle and carbon body for light weight.
- Self-cleaning design to push out mud with step in.
- Tension adjustment.
- Cleats included with all pedal purchases.

Light and ergonomic, the MX is the perfect pedal for all types of mountain biking. With its hollow, steel axle, it is rugged enough for any trail condition. TIME's proprietary ATAC system makes clipping-in super easy, secure, and comfortable. The MX also is self-cleaning, with the ATAC system clearing mud or debris away every time you step in. And by swapping the cleats, you have two release angle options (13º or 17º) along with a self-cleaning design that means you'll always be able to clip in – even in the muddiest of conditions.
Features
- Light and durable trail pedal.
- Easy in or out of cleat.
- Freedom of movement lateral and angular.
- Designed for rugged adventure.
- Cleats included with all pedal purchases.

The XPRO 10 is TIME's top blend of performance and value in a light weight and ergonomic race-ready pedal. The pedal maximizes power transfer and stability thanks to its large 725mm-squared surface area. The pedal's bottom fairing helps improve aerodynamics and protect the carbon blade. TIME's patented pre-opened ICLIC system allows for fast and easy cleat engagement. TIME pedals are designed to eliminate pedal-induced discomfort. You can precisely manage tightness of the clamping mechanism with three settings of the tension adjustment on the carbon blade. TIME XPRO pedals offer three options for Q-factor to provide riders with more ergonomic options. The pedal's low stack height provides good clearance. The XPRO 10 uses a hollow stainless-steel axle, making it strong but light.
Features
- High performance, light, ergonomic at the right price.
- Fast and easy cleat engagement.
- Three tensions settings of carbon blade.
- Low stack height for good clearance.
- Cleats included with all pedal purchases.

The XPRO 12 is the go-to pedal for top racers thanks to its light weight and ergonomic design for countless hours of riding without pedal-induced discomfort. With its carbon body and titanium axle, the XPRO 12 is wildly light but robust. The pedal's large 725mm-squared surface area provides efficient power transfer and vital stability, so you're ready for sprints and explosive efforts. The pedal's bottom fairing helps improve aerodynamics and protect the carbon blade. TIME's patented pre-opened ICLIC system allows for fast and easy cleat engagement, so you are fast off the line. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for Q-factor to provide riders with more ergonomic options. Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. The XPRO 12 uses a titanium axle for a maximum rider weight of 90kg.
Features
- Light, ergonomic, aero performance pedal.
- Fast and easy cleat engagement.
- Three tensions settings of carbon blade.
- Low stack height for good clearance.
- Cleats included with all pedal purchases.??????

The XPRO 12 SL is the ultimate expression of pedal technology. This is the lightest and most ergonomic road pedal system on the market. The XPRO 12 SL's carbon body and proprietary design create a powerful structure to transfer power from your legs to the road. Power transfer and stability are enhanced with a larger pedal surface area of 725mm-squared compared with the already large surface area of the XPRESSO at 700mm-squared. The ICLIC system, with its pre-opened design, allows for positive engagement and greater comfort. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for Q-factor to provide riders with more ergonomic options. Finally, the XPRO 12 SL features watt-saving ceramic bearings and a super light hollow titanium spindle, resulting in an overall weight of 87.3 grams per pedal. The carbon blade is also adjustable in 3 positions to optimize engagement tension. The pedal's low stack height keeps the cyclist's sole as close to the center of the pedal axle as possible, which, along with the large pedal surface area, results in incomparable pedaling efficiency and comfort. We recommend a maximum weight of 90kg.
Features
- TIME's ultimate road performance pedal.
- Fast and easy cleat engagement.
- Three tensions settings of carbon blade.
- Low stack height for good clearance.
- Designed to be aero and light weight.
- Cleats included with all pedal purchases.

TIME XYSTO is a robust full-bodied pedal system for DH, Enduro, and aggressive off-road riders. The asymmetrical design fits the natural shape of your sole, with the extra-large platform providing additional support and control. TIME’s proven ATAC technology provides easy entry, retention, and mud clearance.

Link is the easy way to up your pedal performance to clipless. The Link features a flat platform, which is perfect for almost any casual ride and gives you the freedom to ride and walk in the comfort of your favorite shoes. Or you can step into the TIME’s ATAC clipless system, which lets you clip-in with your favorite cycling shoe, giving you extra pedaling efficiency when you find yourself on longer or faster trips. - Ideal for the casual or urban cyclist who appreciates performance - Great option as a first clipless pedal - Aluminum body with steel spindle for durability - Easy in or out of cleat - Ride like a traditional flat pedal or step in to ATAC system - ATAC Standard Cleats included

The Speciale 10, while inspired by the premium Speciale 12, stands on its own as a high-performance pedal. This pedal is up to the challenge of whatever downhill, Enduro and trail riding throws your way. Pick from two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. Grippy and durable, the Speciale 10 features an alloy anodized platform and oversized hollow steel spindle. The pedal is spring-retention adjustable (micrometric) to meet the demands of advanced riders and features TIME’s ATAC design for easy entry, predictable release, and mud clearance for reliable performance in all conditions. - Designed for performance in all conditions for enduro, trail, and downhill - Alloy platform body with hollow steel spindle - Easy engagement and performance in all conditions - ATAC cleat design clears mud with every step-in - ATAC Standard Cleats included

The Speciale 12 is the ultimate balance between aesthetics and performance. This grippy, lightweight, and strong pedal was developed for the demands of professional enduro, trail, and more. The Speciale 12 features an alloy anodized platform, titanium spindle, and is available in two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. The pedal is spring-retention adjustable (micrometric) to exceed the demands of the most advanced riders. The Speciale 12 features TIME’s renowned ATAC design for easy entry and mud clearance. TIME’s renowned engagement system allows easy engagement with a positive, predictable entry and release. - Premium design and performance in all conditions for enduro, trail, and downhill - Alloy platform body with titanium spindle - Easy engagement and performance in all conditions - ATAC cleat design clears mud with every step-in - ATAC Standard Cleats included

Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement. - Super slick, patent pending, spindle design - Super low-profile design; 10mm thickness at center - Custom undercut pins provide “clip in” style grip and easy removal - Pedal body carriers 4 hidden pins for easy replacement of broken pins - Tapered outside pedal edge for maximum grip and ground clearance - Large foot platform for modern day DH, 110x108mm

The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021. - Super slim 12mm for maximized pedal clearance - CNC weight-optimized trail pedal at 360g per set - Forged alloy body is shot-peened and anodized for increased durability - Equipped with hollow taper Chromoly steel axles for unmatched strength - Sealed bearings and IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip - Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike - Crank boots compatible axle

- Crank Boot Compatible Axles - Full Anodized Finish - 12mm Thin—Massive 11x11cm Platform - Cold Forged Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Chamfered Side Edges for Improved Cornering Clearance - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - 18 Adjustable Pins per Pedal - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin

After a lifetime of research + three years of development, we finally introduce to you, the greatest flat pedal ever created. Sparing no expense, the Crue Pedal was meticulously designed to achieve the best grip, pedal-feel, rock deflection, durability, serviceability, low center of gravity and weight for the pedal we’ve always wanted. Asymmetrical design: We were able to achieve incredible rock deflection on the front leading edge, while keeping the front foot surface wide, where it matters most. 16 square inches of pedal surface, while keeping the overall dimensions and weight to a minimum! IGUS bushings, primarily used on Trophy Trucks racing in Baja, the internals of the Crue Pedal are just as impressive as the outside. Double ABEC main bearings for added strength and longevity, as well as an 8mm dust-seal to make servicing easy for years to come. Quadrilateral concave: The Crue Pedal provides you an incredible 1/4” of concave (6mm), giving these pedals the most grip and pedal feel of anything on the market. 8mm Crank-Arm to Pedal-Body: To keep the spindle strong, provide less pedal exposed to rocks and keep your feet close to the bike for more control. 6061-T6 Aluminum Body / CroMo Spindle / Igus Bushings / Double ABEC bearings / Steel Pins. Only 410 grams per set, including pins. Dimensions: 117mm long x 105MM wide

- 100% SDG DNA in the design of these pedals - Utilizes a flat profile which allows optimal grip for flat pedal shoes - Composite body design - Minimal 17mm pedal body height maximizes the pedal feel - 105mm x 110mm Platform - Ramped and undercut traction pad - 18 pins, replaceable, bottom loaded - Bearing/bushing design for maximum durability. Fully rebuildable pedal design - Cro-Mo axle

- 90mm x 90mm Small Platform - Cro-Mo Axle - 6 rear loading, replaceable steel pins - Gripper profile for enhanced pedal traction - Fully sealed and lightweight DU bushing design

- 90mm x 90mm Small Platform - Cro-Mo Axle - 6 rear loading, replaceable steel pins - Gripper profile for enhanced pedal traction - Fully sealed and lightweight DU bushing design - Pedal Weight: 310g