Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Sealed stainless Steel cartridge bearings - Hub shell machined from forged aluminium billet - Standard 6 bolt disc fitting - Larger spoke flange to enable stiffer wheel builds - Unsurpassed reliability - Available in both standard 15mm, 20mm and Torq end cap options - Hub flanges are moved outboard 5mm compared to the standard 100m front hub to increase wheel stiffness - Available Black, Silver, Bronze, Red, Blue, Purple and Orange - Available in 24, 28, 32 and 36 hole drillings - Machined from forged 2014 T6 Aluminium billet - Conversions available for 15mm Boost, 20mm Boost and Torq **Note**Boost 110mm front hub uses a different, wider hub body compared to the standard 100mm front hub
Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Improved sealing to stop dirt ingress and to reduce drag - New Labyrinth seal has zero drag for incredible freewheeling performance - New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. - Increased engagement from 44 to 108 with a new offset 6 pawl freehub design - Wire cut pawls from high strength steel for maximum strength. - New step down axle design for a stiffer more durable freehub - New hub body profile for increased stiffness without adding weight - Ebike Specific hub designed for the demands of ebikes - Fully serviceable and rebuildable with simple tools - Available in 24, 28, 32 and 36 hole drillings - Available with all modern freehub bodies - End spacers can be easily swapped to suit different frame and axle standards - 6 bolt or Centrelock disc fitting - Available in Black, Silver, Bronze, Red, Blue, Orange & Purple
$0.25 - $20.19
Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.
$0.50
Make it more aerodynamic – this nipple is hidden inside the rim. DT Hidden Nipples are designed for high-profile rims, in which the inverted design is essential for optimum precision. They are very light and hidden on the inside of the rim: perfectly suited for high aero wheels. The nipples will align perfectly due to their spherical contact surface. - Weight: 22g for 64 nipples
$0.50 - $46.00
The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples
$0.70 - $23.99
Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
$1.80 - $8.00
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
$2.00
The Stolen rim strip features 30mm width and 20" diameter. - Material: PVC - Wheel Size: 20" - Rim Strip Width (mm): 30 mm - Adhesive: No
$2.00
Heavy duty and extra wide PVC rim strips for maximum tube protection.
$2.49 - $3.00
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
$3.00
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$3.00
- Shell: 8mm flanged axle nut - Flanged
$3.40
Parts for repair and maintenance of DT Swiss hubs.
$4.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$4.00
- Replacement part for Surly hubs.
$5.00 - $40.00
Protect your tubes without adding bulk with these Rim Strips from FSA. They're lightweight, and come in different lengths according to wheel size. Peace-of-mind comes standard.
$5.00
Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.
$5.00
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$5.00
Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.
$5.00
Stainless spoke nipple flat washers from Whisky. - .3mm Thickness
$5.99
Seal kit to keep water and dirt out of your Race Face Vault hubs.
$5.99
Vision's Presta Valve Extender simply screws onto your tire's built-in valve to make it long enough to protrude through your deep-section aero wheels (choose the right length to fit your rim depth). This ensures that you can keep your tires properly inflated. This lightweight and durable aluminum extender comes with a small tool (not shown) for an air-tight installation.
$6.00
Salsa springs for Flip-Off skewers
$6.18 - $14.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$6.50
- Strong nylon reinforced PVC for a secure fit - Handles high-pressures; does not rot - 0.5mm thick
$6.50
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$6.70 - $10.30
Grade 10 chromium steel balls MR17287LLB - 17 x 28 x 7mm 6808LLB - 30 x 42 x 7mm
$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
$7.99
Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes
$7.99
Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads
$8.00
A non-tubeless protective strip to cover the spoke holes in your ENVE carbon clinchers. 
$8.00
276mm Straight-Pull External for Roam 30 27.5 Wheels, 3-pack.
$8.00
Our 2Bliss Ready Rim Strips create a secure barrier from sealant to rim in a clean simple to install strip. Riders running 2Bliss can now change tires quicker and easier than with any other tubeless system.
$8.10
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$8.99
This lightweight, high-pressure rim tape offers great protection against spoke hole flats and is easy to install. This Italian-made tape is light and thin, so it will not inhibit tire fitting. Nylon elastic material is used to ensure a snug fit without movement.
$8.99
You need rim tape to keep your tubes from blowing through the spoke holes, especially when landing big airs. WeThePeople's got your back, though. If your's is questionable, you better replace it with this WTP Nylon Rim Tape, a perfect fit with Logic Rims. - Strong - Lightweight - Tube-proof
$9.00
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
$9.95
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
$9.95
The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards
$9.99 - $13.49
WTP's Helix hub guards are designed to work on The Helixline of hubs, replacing the cones for a perfect fit without having to spread your dropouts. - Includes heat-treated chromoly adaptor to replace hub cone nuts for a perfect fit - Rear Hub guards are compatible with Helix V1 and Helix V2 freecoaster hubs and many other "KHE" style freecoasters on the market
$10.00 - $140.00
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
$10.00
Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types. - Easily snaps over your rims - Stretchy, tightly woven material provides a close fit and protects from abrasion - Sold as a pair - Not for tubeless set up
$10.00
- Replacement steel quick release skewers
$10.00
- Replacement part for Surly hubs
$10.80 - $15.00
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
$11.00
- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture
$11.50 - $48.00
We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels
$12.00 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
$12.58
276mm Straight-Pull External for Roam 40 and Rail 40 Wheels, 3-pack
$12.95
Authentic service bearing kit for Ritchey mountain bike and road wheels. - Bearing service kit for Phantom Flange rear hubs Includes #6903 (x1pc) & #699 (x1pc)
$13.00
The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock. - Improves tension consistency and overall build quality - Prevents spoke wind up - Offers secure thread lock between spoke and nipple - Prevents corrosion between spoke and nipple - Can be used dry or as a slurry - Works great with mechanically locking nipples
$13.73
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech, Joy U, KK 10mm x 1, rear - Compatible with 10mm x 1 axle - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 13.8mm - 1 cone per bag COMPATIBLE HUBS: - Joytech, Joy U, KK 10mm x 1, rear - Taiwanese rear hubs with 10mm x 1 axle
$13.73
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Rear Right Cone - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 12.5mm - Cone Wrench Size: 15mm - 1 cone per bag COMPATIBLE HUBS: - Sora FH-3300, 9-spd Rear
$13.90
- Green colored spoke prep remains pliable for adjustments - Helps keep spoke nipples from loosening
$13.95
- 10mm axle holes for mountain bike applications - 14mm axle holes for BMX applications - Heavy duty steel protects frame, tensions chain - M8 threading, Nylock nut
$13.95
- 14 gauge forged 7075 alloy with CNC finish - Matches Halo and Gusset anodized colors perfectly - Sold in bags of 50 - length: 12mm
$13.95
- Precision CNC machined 6061 aluminum axle nuts - Compare stock steel nuts at 44 grams versus alloy nuts at 16 grams
$14.52
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Sovos 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - Sovos 9mm x 1, front hub - Taiwanese and similar front hubs with 9mm x 1 axle
$14.52
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9mm x 1, front "parallax" style hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 11.0mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech 9mm x 1, front "parallax" style hub - Taiwanese hubs with 9mm x 1 axle
$14.52
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Compatible with 9.5mm x 26tpi axle - Cone Wrench Size: 13mm - Threads: 9.5mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Taiwanese hubs with 9.5mm x 26tpi axle
Page 1 of 14 Next page